Classifieds

I can only assume this is a very rare find. Still has the original sticker on the lens in the original lightbulb. It has never been used. The chrome is perfect. It does not include the turning hardware that goes through the roof and into the helm. Anyone doing a high level restoration could certainly appreciate this. Make an offer!

Left and right hand, no dents or dings, but could use a little polish. For 1 1/2" shaft. Bronze. Came with either my 47' or 41', not sure, I just use the same prop but 3-bladed on the 41'. Members of this forum know what these are worth, so make me a logical offer, not really needing to sell but they aren't being used, so...

Selling just the motor or the motor with the boat.

1968 Commander 38 in very nice condition. Runs and cruises as is on the one motor.

2023 Jasper 8.1 Crusader

Captains Choice

I have 2 manifolds For sale, $750 each. They were refurbished by Ace Welding in Traverse City and are ready to go back in circulation. Call Or text Steve @ 231-633-2616

I have a dresser that is original to the boat that will no longer fit due to some renovations. The top finish does have some water damage, but overall it is solid. If anyine would like it feel free to give me an offer. I am not sure what its worth, but would rather have it go to someone who needs or wants it.

Portable Light Company 1/2 mile Ray. Very good condition. $500 plus shipping. Located in California. Contact robertmg@pacbell.net

I have 2 intake manifolds that are refurbished. They have been nickel brazed and are ready to go back in service.

Located in Traverse City, Mi.

Call or text Steve with questions 231-633-2616

1979 45 Chris Craft flush deck FLY BRIDGE (TOURNAMENT MODEL) FOR SALE

BEST OFFER

PLEASE CALL PAUL ARPIN 239.877.4450

I have a complete electrical panel out of a 36 Commander. The only two switches missing are the 2 generator starting switches (Preheat and Start) This panel is complete and was working when pulled. It uses the old CC Push pull breakers, It has transfer switches and meters for both AC/DC. It is a great SPARE PARTS piece for someone with the same panel on their boat. I'm not looking to get rich off this stuff. Make me an offer no matter how low and include shipping cost in your offer and it can be yours if we make a deal. See pictures for details. Text or call: 704-287-3914 Lee.

I was going to take this apart and use the base and components to make a smaller mast for my 31’ but figured someone out there is looking for one. Be a shame to cut it up if someone here needs it so can’t bring myself to do it.

Stainless is in good shape and will polish up nicely. The plastic covers for the center piece have some wear but could be painted or wrapped to look like new. The wood under the plastic is original and rotted and needs to be replaced to make it all structurally sound again. Not sure who added the 360 degree light and I intended to replace it with an original light but it does work. The yard arms are in great shape and all the cables are present and in good shape. The previous owner took this off of a later 70’s 41’…

Not mine...found this on an auction site...

https://bringatrailer.com/listing/1968-carousel-international-chris-craft-boat-kiddie-ride/

1968 Chris Craft 427 BOTH exhaust manifolds and parts. asking $1200 plus shipping for both Manifolds STARBOARD Engine. I have oil pan and cooler for $450 plus shipping all items are in near perfect condition and function perfectly. Lost My Commander in a bad storm, FLORIDA

2 working Q distributors. one is a pertronix upgrade. the other is a Sierra electronic replacement. both working just fine when removed. comes with all the extra parts shown. would like to sell the whole pile for $500. but willing sell individual pieces. clinton river area.

One mile Ray searchlight from our 1968, 38 ft Commander with thru overhead bracket and adjustment.

It was right in our line of sight on the flybridge so we put something smaller in.

350.00

I think it is a Prestolite MDY-7045 starter, from Marine Power Engine c1980.

replaces CC part numbers 16.61-00044, 16.61-00050

It was replaced by a new ARCO 50160 starter, and then I had it rebuilt by Beach Generator Service in Revere MA.

See service receipt.

$250 or best offer, plus shipping (about 24 lbs)

COMMANDER LITERATURE; New batch of original CC material just in. Many Commander/Catalina/Roamer brochures, catalogs, spec sheets. Send me your year/model/length for a quote. email legrandfromage@comcast.net

Doing a repower on my 38 Chris Craft Commander I would like to sell the old motors. They have 1600 hours on them and need to be rebuilt

Trident TRL-645 marine 6 inch rubber wet exhaust elbow, 45 degree. New unused, I bought for my boat engine repower project. $50ea, I have two available. Located in Toronto, ON - willing to ship at buyer's cost.

Trident TRL-690 marine 6 inch rubber wet exhaust elbow, 90 degree. New unused, I bought for my boat engine repower project. I have two available, priced at $70 each. Located in Toronto, ON - willing to ship at buyer's cost.

New unused marine wet exhaust hose by Vetus. 6 inch diameter by 20 inches long. Wire reinforced. Leftover from my repower project. $40. Located in Toronto, ON - willing to ship at buyer's cost.

Much as I'd like to keep things original, electrical burners are no longer something I want to keep, but I do know many people love these stoves. This one is coming out of my 1979 commander 410, is fully original and functional. If desired, I can extract the whole wooden frame around it, including bottom drawer, and sell it with the stove. That will cost a little more as it will be more work. Speaking of price, I'm not sure what these usually go for, so enlighten me, either with an offer or an idea. Item is located in Northern Florida, Gainesville, and can be picked up or shipped.

Stainless swim ladder with 4 steps from my 35 in good condition.

It would fit pretty much any size boat over 27'.

$30 + shipping.

KFL and KLC Hercules Marine Engines (single carb each)

Both engines came out of my '58 Chris Craft Sedan Cruiser, 28ft

Blocks: 

- professionally machined/assembled, bored .030" over 

- Van Ness Engineering supplied the new sleeves, valves, bearings/rods/pistons and incredible knowledge and experience to guide me through the rebuild process

- cylinder sleeves used to improve reliability